We use vacuum cleaners to clean the house more quickly and to prevent wastage of time. Since these are electric devices, we need to be careful about their use. As a result of carelessness and whimsy, it can scare you.

At one point in the use of the vacuum cleaner you may smell something burning, just like rubber. Or you can see the smoke. But what is the reason? Why this smoke or burning smell if you’re vacuum is running properly. There could be several reasons for this. You should immediately stop operating the vacuum. Because you don’t know what’s going on inside the machine. The vacuum is leaking or getting a burning smell, which means the vacuum, is faulty. You must find out the reason.

Today we will discuss the most common reasons for vacuum smoking or burning smell. Keep reading with us to find out the problem of your vacuum.

Why is Vacuum Smelling Burnt?

When you suddenly get a burning smell from a vacuum or see smoke you don’t know why it happened. Your first task at that moment is to stop them from operating, and if you do not want to have a major accident with your vacuum, you need to find out the reason for their behavior right away. The most common causes of burning smell from vacuum are mentioned. If none of these are the reasons, consult an expert quickly.

Vacuum’s Drive Belt

The main reason for the burning smell of your vacuum is said to be the burning of their drive belts. The drive belt basically manages the vacuum brush, allowing the brush to rotate seamlessly. When the vacuum creates suction with the help of a motor, it starts to rotate and the brushes start rotating. However, if for some reason the brush gets stuck, it still tries to supply power to the motor and slowly it starts to heat up. At one point it starts to melt. When you get the smell of rubber burning, it can be caused by the problem of their drive belt, because the belts are made of rubber.

If something like that unplug the vacuum first and hold it upside down, you’re going to open their brush. Open the screws one by one and check the belt. Remove the roller brush if needed, if the belt is still intact, check the brush and clean the dirt stuck in it. Or the belts are burning or not intact, and then must be replaced.

Clogged the hose

Places with a vacuum hose and filter where dirt has accumulated and if it gets heated in any way, it can start to burn at once. A lot of the time we spend with vacuums when they have to be overused the various spaces connected to them can become heated. While this is normal, if there is debris there will start to burn so much, which is not normal at all and it can spread the smell.

So search it first and clean up. Never think this is not an electrical problem or their connection problem so avoid it. Of course you don’t have to wait for an accident to happen.

Problem with the motor

Another problem is if you are sure that your vacuum brush and belt are intact and it is working normally. You made sure you checked the other parts of the vacuum. If you are getting an unusual sound with a burning smell, you may assume it is a motor problem.

This problem of motor can be due to various reasons. Many times overuse of them can lead to overheating and at some point it starts to give off a burning smell. There are many sophisticated vacuums on the market today that auto shut off before something unexpected happens to the motor. Moreover other vacuums start burning for their extra heat. Perhaps it is time for you to seek the help of a professional mechanic.

Stuck Brush Roller or Beater Bar

You can also get a burnt smell because of a broken roller brush. It is not uncommon for the brush to emit a burning odor. When the vacuum’s motor is running and it is producing energy it means that it supplies power to all the moving parts of the vacuum. If any one part of it becomes ineffective then it can start burning using that energy.

If you notice something like that, unplug the vacuum first and open the brush to check. If it is really burning, replace it. If you can’t trust yourself to do the job, take the help of a professional, don’t go it alone.

Check Vacuum’s Cable or Wall Plug

Due to the heating of the vacuum’s cable or wall socket, you can get burnt smell many times. This may be due to any abnormal action of the vacuum or weak connection. And over-running of the vacuum’s motor may also be the cause.

If burned by a cable or wall socket, be sure to check it out as it can cause a major accident. See if the socket is fitted properly. Be sure to keep the vacuum filter clean and its parts clean. Try a different socket if it’s still overheating; take the help of an electrician. If you do not have experience in electrical work, do not do it yourself, it can be terrible.

Frequently Ask Question (FAQ)

If you see something like that coming from your vacuum or smells of burning, then the above steps must be followed for you. Even then you have some questions. Here are some of the most common questions we have

Q: Is it important to change the belt

Ans: This question may seem to you from the vacuum belt problem mentioned above. I have already said and will say again. If your vacuum belt starts to melt, you must change it to avoid future accidents.

Q: How to change the vacuum belt 

Ans: To do this, first remove the old belt attached to the motor and brush roller. Install the new belt in exactly the same place. If you do not understand this, follow the manual.

Q: What to do if the vacuum is smoking

Ans: Only when you operate your vacuum can it emit smoke or a burning odor. Because these things can happen if you’re vacuum continues for a long time. So if your vacuum ever emits smoke, your first task will be to shut it off and check the points mentioned above. If you do not find any of these, consult a professional.

Q: Is it costly to replace the vacuum belt

Ans: No, it’s not vacuums belts are made of rubber and are a cheap replacement. Although it comes with a different price depending on the model of the vacuum, in most cases a pair of belts charges 5-10 dollars.

Conclusion

Vacuum cleaners play an important role in meeting our daily cleaning needs. So the importance of maintaining them properly is much more. We know that when a device operates above a certain limit, it quickly loses its lifespan.

When using a vacuum cleaner, it is not uncommon for it to emit smoke or a burning odor. Instead of panicking, quietly unplug them and find their problem. The most probable reasons for doing this are discussed above. This will help you to understand the cause of the burning odor coming out of the vacuum so that you can repair it.

Leave a Reply

Your email address will not be published. Required fields are marked *